Unigraphics NX Sheet Metal Design Training Contents
Training
Written by Jytra Administrator   
Wednesday, 18 May 2011 19:26

NX Sheet Metal Design

Following are the detailed course contents for NX Sheet Metal Design Course (Course Code MT16020_s):

  1. Course Overview
  2. Typical NX Sheet Metal Workflow
  3. Preferences and Defaults
  4. NX Sheet Metal Base Features
  5. Tab Activity
  6. Create and Edit Contour Flange
  7. Contour Flange-2 Activities
  8. Lofted Flange
  9. Lofted Flange-2 Activities
  10. Flange
  11. Flange-3 Activities
  12. Bend Taper
  13. Hem Flange
  14. Convert to Sheet Metal and Flat Solid -1 Activity
  15. Sheet Metal from Solid
  16. Bend Region Control
  17. Flat Solid
  18. Flat Pattern
  19. Bending Sheet Metal
  20. Bend Region
  21. Sheet Metal Corners
  22. Edge Rip
  23. Jog
  24. Sheet Metal Cut-outs
  25. Dimple
  26. Drawn Cutout
  27. Louver
  28. Solid Punch
  29. Bead
  30. Starting NX with Teamcenter Integration for NX (for Teamcenter Users only)
  31. Aerospace Sheet Metal (on Special Requirement only)