Testimonials

Submit a Testimonial

Faculty members are very cooperative and convincing in teaching.
 
Date of Posting: 18 January 2012
Posted By: Gurukrushna Sahoo
Diploma Holder in Metallurgy, Bhubaneswar
Thank you for the kind support, very good training given by your faculty.
 
Date of Posting: 13 January 2012
Posted By: Sundarreddy
Student, Hyderabad
Good Training...

Thanks to madhu madam and murali sir for ur support.
 
Date of Posting: 18 November 2011
Posted By: A.Archana
BTech, Mechanical
Very good institute for AutoCAD, I was satisfied.
 
Date of Posting: 15 November 2011
Posted By: S.N.VISWANATHA REDDY
ME B.TECH EEE GRADUATE, KURNOOL
Training was extra-ordinary but the time was 10 days only so could not able to learn much of it.
 
Date of Posting: 21 September 2011
Posted By: Abhimanyu Namdhari
Certification Engineer, Hyderabad
Had undergone a training program of 10 days for NX 7.5. Had good time and learnt a lot
 
Date of Posting: 21 September 2011
Posted By: Kalyan
junior design engineer, Hyderabad
I found the NX 7.5 training, to be really good. The teaching was effective for theory. People here also helped me a lot during practical sessions. I really enjoyed the training. Thank you one and all.
 
Date of Posting: 21 September 2011
Posted By: Sagar Chate
GET in e Mug Technologies., Somajiguda, Hyderabad
Its a very good experience in jytra.. I learned NX7.5. Jytra provided me the good knowledge on NX7.5. Thanks to Jyothi and Jytra team.
 
Date of Posting: 21 September 2011
Posted By: Pramoda
e-mug employee DEDC for BE AEROSPACE, Hyderabad
Thanks for providing Unigraphics NX7.5.
Efficient facalty and communicators.

Thanks to Murali sir for GD&T class.
 
Date of Posting: 21 September 2011
Posted By: Suresh Kalidindi
Diploma in Automobile Engineering, Hyderabad
Thank you Murali Sir for providing us with this institute with professional Guides especially my trainer MADHUMATI who helped to expertise in UniGraphics NX ...!!!

Thank you...JYTRA TEAM (Murali, Madhumati, Jyothi and Vineela...)
 
Date of Posting: 17 September 2011
Posted By: Rohit.Y
Mechanical Engineer, Hyderabad
The teaching is very good, interactive and practical. Training module is also well prepared. But all other coaching centers are teaching manufacturing module in less fee. So please add that module also in teaching.
 
Date of Posting: 16 September 2011
Posted By: Hari Kiran Deevi
Learner, Mylavaram
I feel satisfied, and happy about the way the faculty(Mr.Govind Naidu) taught me.
 
Date of Posting: 15 September 2011
Posted By: Sravan Kavalipurapu
Architecture Student, Hyderabad
It provided me a very good experience about the software. I had learned a lot about the CAD 2D&3D Modelling.
 
Date of Posting: 15 September 2011
Posted By: D.Sarath Babu
Job Seeker, Machilipatnam
Learned many new things in NX.Thanks for the excellent training.Special thanks for Madhumati madam and Murali sir.
 
Date of Posting: 21 August 2011
Posted By: Samuel Sandeep N
B.Tech/Mechanical Engineer, Bhimavaram
Thanks for providing Excellent Training on UG NX 7.5. Great Job Madhumathi.
 
Date of Posting: 17 August 2011
Posted By: SIVALINGAM.K
Sr. Design Engineer, eMug Technologies, Bangalore
A good systematic learning & a fine faculty, thank u..
 
Date of Posting: 17 August 2011
Posted By: Navin Atluri
Automotive Engineer, Chennai
"Training provided on NX 7.5 is good.Trainers responded to our doubts with patience.Thank you."
 
Date of Posting: 12 August 2011
Posted By: A.S.R.HITESH
B.Tech, Mechanical Engineering, Hyderabad
Increase lab facility for more hours for better practice.
 
Date of Posting: 12 August 2011
Posted By: Gopinath
Mechanical Engineer, Hyderabad
Increase lab hours and placement facilities and while teaching analyze more examples and give projects to do in lab so that we can get project experience.
 
Date of Posting: 12 August 2011
Posted By: Vinod Kumar
B.Tech Aeronautical Engineering, Hyderabad
We, four in number, are students of JNTU College of Engineering at Hyderabad. We have recently completed our training in Unigraphics at Jytra. The training was great, easy to understand and challenging at the same time. Overall a great experience.
 
Date of Posting: 12 August 2011
Posted By: JNTU Students
B.Tech students, JNTU, Hyderabad
The training was great and the management were very professional. Overall a great experience.
 
Date of Posting: 12 August 2011
Posted By: Rajkiran Gaddati
B.Tech student, JNTU, Hyderabad
Learned many new things and techniques of drawings .... the way Madhumati dealt with some questions asked by me was good. Murali is so supportive..had a very good time here..
 
Date of Posting: 11 August 2011
Posted By: Sayi Rama Krishna
Mechanical Engineer, Kakinada
Thanks for the excellent training. Though the training period was shortened as per my request, Madhumati has covered most of the topics in very organized manner. Thanks for teaching few advanced topics by Jyothi which are not even part of the standard course. Thank you!!
 
Date of Posting: 10 August 2011
Posted By: Soma Prabhakar
Product Design Engineer, Japan
I have completed my NX-7.5 training and I had an amazing experience which will help me a lot in my future for which I would like to thank everyone in the institute.
 
Date of Posting: 09 August 2011
Posted By: Ankit Parmar
B.Tech (Mechanical), Ameerpet, Hyderabad
It's a good training center for CAD/CAM course.......well educated staff..as well as infrastructure..!!!!!
 
Date of Posting: 02 August 2011
Posted By: Bachala Sabarish Reddy
Engineernig Graduate, Hyderabad
"I took training on UG NX 7.5 at Jytra. I would like to mention that the training conducted by our trainers (Jyothi and Madhu) were very informative and would surely help me in long run. I would take this opportunity to thank Jytra Engineering Services for offering such a informative and detailed training"
 
Date of Posting: 19 July 2011
Posted By: Sujay Marathe
Design Engineer, BE Aerospace DEDC, Hyderabad, Hyderabad
Jytra Engg Services is sweet surprise for me.
i have achieved a lot beyond my imagination.
Thanks to all support staffs who are very supportive.
Special thank to Madhu who was my trainer for 1 week.
i hv learnt many thing from her which will help me a lot for my future growth.
 
Date of Posting: 02 July 2011
Posted By: Rupak kanungo
Design Engineer in LG Electronics, New Delhi
It was really a nice and memorable time for me at Jytra Engineering Services, Hyderbad. I would like to thank our trainer [Jyothi :)] and all the staff for there guidance and support. I am not hesitant to say that the support given by all of you will give me a strong support to grow in my professional life.

Thanking you all.
All The Best.

Cheers!!!

Jyoti Prakash Deo
 
Date of Posting: 01 July 2011
Posted By: Jyoti Prakash Deo
Design Engineer,BE Aerospace DEDC, Hyderabad,India
It is better to have good system environment, training is very good have learnt a lot.
 
Date of Posting: 01 July 2011
Posted By: Vassem Akram
Jr Design Engg E mug, Hyderabad
I am happy of take training in Jytra in NX7.5 with wonderful training system they have. Excellent training with wonderful examples and their applications in today's technology. Tutor responds to each and every doubt I have got in with patience.
 
Date of Posting: 01 July 2011
Posted By: Ravi Kumar P
Design Engineer for BE Aerospace DEDC division of E-mug Technologies Hyderabad, Hyderabad
I am thankfull to Jytra family for helping me out on NX. My trainer Ms.Jyothi, she has a good knowledge on NX, I wish and I hope she may go places and I wish Jytra family will have a rocking future. All the best and thanks again....
 
Date of Posting: 01 July 2011
Posted By: Ashok Reddy S
Design Engineer, Emug Technologies, DEDC for B/E Aerospace, Hyderabad, Hyderabad
Thanks To JYTRA, I Can Rest Assure With My Nx Skills. Its a great place to learn because you always learn something new everyday. I am thankful to Jytra Family for helping me out and improving my Skills. I Wish All The Best, God Bless and Happy Days Ahead :)
 
Date of Posting: 01 July 2011
Posted By: Dhanish A Bangera
Design Engg E mug Technologies ( DEDC for Be Aerospace ), Hyderabad
I think i got a good trainning centre , i am very pleased to this institute thank you.
 
Date of Posting: 24 June 2011
Posted By: MANDA SHANKARA SRINIVASA PRAVEEN
Trainee, Machilipatnam
Jytra did a great job to me and i am fully satisfied.
 
Date of Posting: 21 June 2011
Posted By: shaheen anjum
mehdipatnam
well satisfied by our guide.....thank u
 
Date of Posting: 20 June 2011
Posted By: G.BHARATH
palamaner
Good and clear explaination with examples...<br />
we are well satisfied with your teaching...Thank you...
 
Date of Posting: 20 June 2011
Posted By: V.Manasa
dharmavaram,anantapur(dist)
Its been a pleasure working with Jytra. Jytra team has shown exemplary commitment in delivering high quality automation tools for us. The team has also been proactive in providing high quality suggestions to improve the design of the tool to suit end user requirements. Many Thanks to the team.
 
Date of Posting: 29 May 2011
Posted By: Karthik Narayan T S
Director, En3 Sustainability Solutions Pvt Ltd., Chennai
I would not be overstating if i tell that the training was excellent. The training was up to the mark, precise and comprehensive. Thanks!
 
Date of Posting: 24 May 2011
Posted By: Arjun Koustubhan K. S.
Mechanical Engineer, Hyderabad
Had a wonderful time and interaction with the trainer. Learn't some of the basic concepts from scratch.
 
Date of Posting: 24 May 2011
Posted By: Siddarth Shivaram Iyer
Design Engineer for B/E Aerospace, Hyderabad
I am one among three, trained in Sketcher, Modeling, Assembly and Drafting modules of Unigraphics NX 5 by Ms. Jyothi from Jytra Engineering Services. Ms. Jyothi showed great enthusiasm while teaching and cleared every doubt we had during the training session. A lot of live examples for various design situations was shown and I feel I have gained a lot of knowledge in the subject. Thanks.
 
Date of Posting: 23 May 2011
Posted By: Pramod Kodila Srikanth
Jr. Design Engineer, Emug Technologies, DEDC for B/E Aerospace, Hyderabad
Thank you for the kind support and courtesies extended during our recent visit to your office. We were able to select a couple of your Engineers to cater to our immediate requirement.
 
Date of Posting: 15 May 2011
Posted By: Krishna Mohan
Senior Manager - Engg, Synergies Castings Limited, Visakhapatnam
I was trained in Unigraphics NX at Jytra. The training is very realistic and professional. Thanks to Jytra for boosting my confidence.
 
Date of Posting: 13 May 2011
Posted By: Sravan Draksharapu
Mechanical Engineer, Kakinada
Thank you very much! It was a pleasure doing business with you!
 
Date of Posting: 13 May 2011
Posted By: Issac Mathew
Engineering Professional, USA
I WOULD LIKE TO SAY THANKS FOR ONE AND ALL IN JYTRA FAMILY.I AM VERY MUCH PROUD TO LEARN HERE.DUE TO MY PERSONNAL COMMITMENT COULD NOT ABLE TO CONCENTRATE PROPELY.HOWEVER I WILL PUT MY TOTAL EFFORT IN THIS NX SOFTWARE.I WANT TO BE A GOOD NX PROFEESIONAL AND ALSO PLAN TO GROWN UP MY CARRIER IN THIS AREA. THIS IS MY FUTURE AMBITION.ALWAYS NEED YOUR FULL SUPPORT.THANKS FOR YOUR COORDINATION AND GUIDANCE.NEVER FORGET ME KEEP IN TOUCH.

THANKS & REGARDS,

V.RAJARAJAN.
MOBILE NO:+91 99405 20101.
 
Date of Posting: 06 May 2011
Posted By: V.RAJARAJAN
i have been working as a Manufacturing Engg in M/S Fivescail-KCP Ltd chennai., CHENNAI.
"We are extremely happy with their training to our students on Solid Edge ST3 at GUNTUR.Our students were trained in a very professional manner by Jytra."
 
Date of Posting: 29 April 2011
Posted By: Vijaya Bhaskar K.
Senior Lecturer in Mechanical Engineering, Guntur
Excellent Services and Training on NX and other Software Tools.
 
Date of Posting: 27 April 2011
Posted By: Amrish K.
Design Engineer at Tecpro Systems Limited, Hyderabad
I would like to thank Jytra for providing me quality training on NX, and I highly recommend them to others.
 
Date of Posting: 22 April 2011
Posted By: Nagender Balu
AutoCAD User, Hyderabad
Good institution for Unigraphics NX Course.
 
Date of Posting: 22 April 2011
Posted By: Nizam Nagaraju
Hyderabad
Progecad is easy and simple to use.
Just needs a little more fine tuning with respect to ease of command buttons.
Also for the window which opens for plot, the commands are on 3 different windows, they should be on one.Its not very easy as the print selection, paper size are on 2 different windows.
 
Date of Posting: 21 April 2011
Posted By: Alka Sood
architect, new delhi
As animator and modeler your course on NX and way of innovating the things will boost my career to great heights.

I really have to say that this is most sounding course which will make u different from the crowd. And its all because of JYTRA.
 
Date of Posting: 21 April 2011
Posted By: Barunesh Nath
I am freelancer 3d Animator and modeler, New Delhi
"Jytra Engineering Services" is a well known company which provides full cooperation & excellent senerio for engineering design aspirants.
 
Date of Posting: 04 February 2011
Posted By: Shubham Shukla
NX6 Certified Designer, SMQ 303, Air Force Academy, Dundigal, Hyderabad
Great. Thanks for sending it. Looks good to me.
 
Date of Posting: 08 December 2010
Posted By: Case M
USA
Thanks for the training provided. It was useful to us a lot. We now know how to start and where to search using the knowledge provided by you.

We hope to use this knowledge for further developing our team for our automation projects.
 
Date of Posting: 22 November 2010
Posted By: Jeetendra
Sr. Automation Engineer , Pune, India
On the occasion of completion of first fiscal year of our business, we are writing to express our sincere gratitude to you and Jytra Engineering Services for the invaluable support given to us – prompt responses to our inquiries, best possible prices and prompt deliveries. We look forward to continuing our business association.
 
Date of Posting: 27 May 2010
Posted By: Ravi
CEO, Hyderabad, India
www.dciera.com
Thank you very much for all the personal attention and efforts from your entire team. Kindly send me the drawings of the entire assembly and the drawings of the individual parts used in the assembly. This approval will make a clear path for mass production and we have lodged Jytra Engineering as the documented and official technology and manufacturing partner for Duneze Pty Ltd - newly formed venture for duneze.
 
Date of Posting: 07 March 2010
Posted By: Rahul Rane
CEO, Brisbane, Australia
All modifications are perfect, thus completes this batch of drawings. You are doing a great job. Keep up the good work.
 
Date of Posting: 20 January 2010
Posted By: Shailesh
Technical Manager, Hyderabad, India
www.ge.com
Jytra, once again did an excellent job for us. I highly recommend Jytra for anyone. We look forward working with Jytra in very near future again.
 
Date of Posting: 27 December 2009
Posted By: Renjhala
President, USA
Excellent Service and Work.
 
Date of Posting: 22 November 2009
Posted By: Rotational Molding Engineering
President, Hongkong
Jytra Engineering Services has provided me the highest quality service imaginable. From start to finish, I received constant, detailed updates in the most timely fashion. My project required heavy innovation, and throughout the entire process, Jytra Engineering has operated well above and beyond my expectations. I feel extraordinarily fortunate to have met such a remarkably resourceful & gifted firm. I am completely satisfied and will most definitely be coming back to Jytra Engineering for future projects. Thank you so much Jytra!
 
Date of Posting: 27 August 2009
Posted By: Dyeshot
CEO, California, USA
Great operators, will use again. Many thanks.
 
Date of Posting: 06 July 2009
Posted By: Vameup
Technical Manager, USA
We are extremely pleased with Jytra for completing the project on time in a professional manner. We strongly recommend them and we will be using their services in a very near future.
 
Date of Posting: 15 May 2009
Posted By: Renjhala
Business Owner, USA
Submit A Testimonial
* fields are mandatory.
Your Name:*
Email Address:*
About You:
Your Location:
Security Code:
Enter Code Here:*
Send us your comments below:*

 

Powered by RS Web Solutions